ITC Thermography Courses for 2012

ITC - Thermography Brief Outline of Courses for 2012

Non certification ITC courses

Getting Started with thermography £160+VAT.

This course gives an introduction to customers operating entry level cameras. The focus is put on the camera and localisation of thermal anomalies.You will also learn how to deal with the surrounding conditions when performing simple temperature measurements, how to store your images and how to use them in reports.

Introduction to Thermography £319+VAT.

Full one day course for customers operating entry level cameras. The content includes basics of thermography, basics of emissivity and reflected apparent temperature, introduction to electrical and industrial inspections, camera handling, software installation and test. This course includes around 2 hours of camera hands on looking at manydifferent materials then an overview of report writing software.

Electrical survey and measurement for Thermography £319+VAT.

This course gives ageneral introduction to IR thermography and an overview on its specific use for inspections of electrical LV and HV systems. It aims at giving you clues on what you can do with your camera. Basics elements such as Ohms law will be covered along with discussions on case studies and typicalfaults found.

ITC Short Course Building Thermography £319+VAT

This course gives a general introduction to IR thermography and an overview on its specific use for inspections of buildings. It aims at giving you clues on what you can see with your camera. Subjects covered are conduction, convection and radiation, basic building envelope, building structures, damp and mold. A look at typical building problems and how to identify them along with surveying guidelines and reporting.

ITC short course for HVAC thermography applications £319+VAT

During this course you will be introduced to various heating systems before you learn about typical faults and how thermography helps you to locate and analyse these. Emphasis is put on case studies, selected from the field as well as practical exercises.

ITC Advanced Building Science (3 day) £935+VAT

This course is designed for operators who want to become advanced users within building thermography. Experience within thermography is mandatory . Experience of buildings is a plus. The content includes insulating materials, 1-D heat transfer in a composite structure, conduction resistance, air – wall interface, U value for simplified structure, temperature profiles, thermal bridges, thermal indexes, transient heat transfer, thermal inertia, comparison of various wall structures, humidity, dew point, vapor permeability, vapour barriers and air leaks.

Level I and Level II Certified Training Courses:

Level 1 Thermography ISO18436 PCN £1700+VAT

This 5 day course prepares you for qualification as a level 1 certified thermographer. You will learn about the basics of infrared, how to operate the camera under different conditions and for various purposes, how to do an appropriate judgement of the measurement situation in the field and identify potential error sources. You will be able to do IR inspections following written guidelines and to report the result of this inspection.

Level 2 Thermography £1795+VAT

The level 2 course is held over five days. This course prepares you for qualification as a Level 2 certified thermographer. You will learn about topics in infrared thermography to both deepen and broaden your knowledge about infrared physics, heat science, infrared measurement equipment and its application. As a Level 2 thermographer you shall provide guidance to level 1 personnel in the areas of equipment selection, techniques, limitations, data analysis, corrective actions and reporting.

Other training courses that are available upon request.

Reporter & Building software courses

R&D Training sessions

GF camera training and theory

To find out the next available dates and locations when these courses will be run and to book your place please contact us as soon as possible.

Did you know: You can claim the full cost of this course back against the price of a brand new FLIR thermal image camera within 12months of purchase. 

FLIR B-Series Promotional Offer

FLIR B-SERIES WITH SOFTWARE AND/OR A SELECTION OF LENSES - PROMOTIONAL OFFER

Take advantage of a complete package and save up to £ 4,794 

As the world leader in thermal imaging, FLIR Systems considers it it's mission not only to produce the best thermal imaging cameras on the market, but also to bring the advantages of thermal imaging to as many users as possible.

A complete thermal imaging solution is more than a thermal imaging camera alone. Users need to be able to generate comprehensive reports that can be presented to customers or management. Therefore good and easy to use software is important. Depending on the situation you might need a tele- or wide angle lens.

In order to make sure that users can benefit from state of the art software and to give them the opportunity to adapt their thermal imaging camera to every situation, FLIR Systems is offering packages for it's T335, T365 and T425 thermal imaging cameras.

1. FLIR B335 + Reporter Software for £ 7,966. Saving £ 1,322.
2. FLIR B365 + Reporter Software + 15° lens OR 45° lens for £ 10,636. Saving £ 3,058.
3. FLIR B425 + Reporter Software + 15° lens + 45° lens for £ 13,306. Saving £ 4,794.

The FLIR B335, B365 and B425 thermal imaging cameras offer excellent image quality and ergonomics. Depending on the model they contain many features that will help the user to make well informed industrial inspections.

The Extech MO297 Moisture Meter is also included in the packages.

All models include MeterLink functionality and WiFi as well. MeterLink allows the thermal imaging camera to be connected with an Extech MO297 Moisture Meter over a Bluetooth connection. The values read from the moisture meter are wirelessly transmitted to the FLIR thermal imaging camera. This reduces errors and saves time during reporting.

WiFi allows users to wirelessly transfer images to a PC, iPhone or iPad.

By offering these packages FLIR Systems wants to offer proffesional users a complete thermal imaging solution.

Warranty
On top of these exclusive bundles FLIR Systems is giving a full 2 years of warranty on every handheld thermal imaging camera that is marketed for predictive maintenance and building applications and is equipped with an uncooled microbolometer detector. The uncooled microbolometer itself is covered by no less than 10 years of warranty. If a problem should occur within this time frame FLIR Systems will replace the uncooled microbolometer detector free or charge or, depending on the case, even replace the entire thermal imaging camera. In order to benefit from these warranty conditions, the owner of the FLIR thermal imaging camera needs to register their product at the FLIR Systems website within 30 days of purchase.

Validity
This offer is valid for orders received from October 1st 2011 to 31st December 2011. No other FLIR Systems offers or promotional campaigns can be cumulated with this promotional offer.

To take advantage of this great deal please contact us.

FLIR T-Series Promotional Offer

FLIR T-SERIES WITH SOFTWARE AND/OR A SELECTION OF LENSES - PROMOTIONAL OFFER

Take advantage of a complete package and save up to £ 4,574 

As the world leader in thermal imaging, FLIR Systems considers it it's mission not only to produce the best thermal imaging cameras on the market, but also to bring the advantages of thermal imaging to as many users as possible.

A complete thermal imaging solution is more than a thermal imaging camera alone. Users need to be able to generate comprehensive reports that can be presented to customers or management. Therefore good and easy to use software is important. Depending on the situation you might need a tele- or wide angle lens.

In order to make sure that users can benefit from state of the art software and to give them the opportunity to adapt their thermal imaging camera to every situation, FLIR Systems is offering packages for it's T335, T365 and T425 thermal imaging cameras.

1. FLIR T335 + Reporter Software for £ 7,966. Saving £ 1,102.
2. FLIR T365 + Reporter Software + 15° lens OR 45° lens for £ 10,636. Saving £ 2,838.
3. FLIR T425 + Reporter Software + 15° lens + 45° lens for £ 13,306. Saving £ 4,574.

The FLIR T335, T365 and T425 thermal imaging cameras offer excellent image quality and ergonomics. Depending on the model they contain many features that will help the user to make well informed industrial inspections.

The Extech EX845 Clamp Meter is also included in the packages.

All models include MeterLink functionality and WiFi as well. MeterLink allows the thermal imaging camera to be connected with an Extech EX845 clamp meter over a Bluetooth connection. The values read from the clamp meter are wirelessly transmitted to the FLIR thermal imaging camera. This reduces errors and saves time during reporting.

WiFi allows users to wirelessly transfer images to a PC, iPhone or iPad.

By offering these packages FLIR Systems wants to offer proffesional users a complete thermal imaging solution.

Warranty
On top of these exclusive bundles FLIR Systems is giving a full 2 years of warranty on every handheld thermal imaging camera that is marketed for predictive maintenance and building applications and is equipped with an uncooled microbolometer detector. The uncooled microbolometer itself is covered by no less than 10 years of warranty. If a problem should occur within this time frame FLIR Systems will replace the uncooled microbolometer detector free or charge or, depending on the case, even replace the entire thermal imaging camera. In order to benefit from these warranty conditions, the owner of the FLIR thermal imaging camera needs to register their product at the FLIR Systems website within 30 days of purchase.

Validity
This offer is valid for orders received from October 1st 2011 to 31st December 2011. No other FLIR Systems offers or promotional campaigns can be cumulated with this promotional offer.

To take advantage of this great deal please contact us.

Proviso Acquire Marden Thermographic

Marden Thermographic Joins Proviso Systems Ltd

We are pleased to announce that our discussions with Marden Thermographic have been completed and that as of the 1^st of October 2011,  Marden Thermographic will become a trading division of  Proviso Systems Limited.

The addition of Marden Thermographic to the Proviso team is designed to increase our current capacity to provide Professional Thermographic Surveys, whilst maintaining our ability to meet the individual requirements of our combined customers.

We here at Proviso acknowledge the commitment to date and reputation of the Marden team and would like to assure you that the level of service you have received will be maintained, and if at all possible, improved upon. In conjunction with their other predictive maintenance technologies, Proviso also carry out Thermographic Surveys and hence the merger will combine and strengthen the two existing teams.

Whilst inevitably there will be a few changes, it is our commitment to ensure that the services are carried out to the standard you have received to date. For most customers, the Thermographic Survey Engineer will not change and your current reporting formats / systems will continue.

There will be a few changes at the office in that operations and administration will move to our Head Office.

For future Marden Thermographic information, contact and support, please use the following contact and address details.

If you require any additional information, have any questions or concerns, please do nothesitate to contact me directly at any time

On behalf of Marden Thermographic and Proviso Systems Ltd.

Mike Deakin (Business Integration)